Notes d'application

The determination of Nitrogen is crucial in the material characterization and quality control procedures for the manufacturing and molding process of plastic materials. The LECO FP928 is a Nitrogen determinator that utilizes an automated Dumas combustion method and provides accurate and precise results in approximately five minutes. This eliminates involved sample preparation and the use of hazardous materials resulting in a cost-effective method for the quality control of plastic production.

This application note describes how to use a simple workflow with the LECO Paradigm system to fulfill the requirements of the ASTM D8396 test method to quantitatively determine mass % of total n-paraffins, iso-paraffins, naphthenes, 1-ring aromatics, and 2-ring aromatics using reverse-fill flush flow modulated comprehensive two-dimensional gas chromatography–flame ionization detection (GCxGC-FID). Understanding of bulk composition is crucial for fast-track certification of synthetic aviation fuels as outlined in ASTM D4054, and the more accurate group-type analysis results provided by GCxGC assist with streamlining the acceptance process.

For numerous applications, it is necessary to measure the quality of a weld, and there are several methods for doing so. Making a sacrificial test weld and using a microscope to measure the weld's critical areas is a popular technique. This procedure may require a lot of time and resources. However, by skipping the mounting and polishing stages, the work can be kept more efficient. Bypassing those phases in the metallographic sample preparation procedure, this "Cut and Etch" technique yields accurate readings.

Ginger Oil Analysis and Grade Differentiation with Pegasus BTX Using Hydrogen Carrier Gas

Determination of Ash in Polystyrene

Pegasus BTX and ChromaTOF Sync Application Note - Thyme Varieties

Pegasus BTX 4D Application Note - Synthetic Aviation Fuels

Pegasus BTX Application Note - PFAS

Pegasus BTX Application Snapshot - Molassess

Pegasus BTX 4D Application Snapshot - HTL Pyrolysis Gasoline

Wildfires increase the risk of negative chemical reactions with municipal water treatment processes.

Pegasus BTX 4D Application Snapshot - Basil

Atomic Emission Spectroscopy can determine elemental content of solid conductive materials. The GDS900 is designed to analyze ferrous and nonferrous metals, including cast iron.